Search the Community

Hello Team. Long Time No Talk with you Guys Please find attach the Extra Folder I put together for OS X 10.9 Setup on Dell Precision M4600. Extra.zip Just Prepare the USB with My Hack. then Run My Hack again and Setup the Attached Extra Folder on the OSx Mavericks Installation USB. Use again the Extra Folder Finishing the OS x Mavericks installation on your M4600. Good luck

This is for the model E6420 with the Intel 3000 Graphics Card, could someone who uses the Nvidia version please post their findings on it. Thank you all. Although this guide is made for the i3-quad core, 8GB RAM, v3 ALPS, it has been extended to other types, just read through the thread. Credits @Jake Lo - DSDT patches for HDMI audio, AppleIntelSNBGraphicsFB Patching for VGA and HDMI video output, the boot pack, Patching AppleHDA and finding the HDAEnabler trick in chameleon for audio, a lot of help with just about everything @Stork - Starting the research thread and figuring out the original stuff back on Lion (: @Bronxteck - User Support @RehabMan @BpedMan @sontrg @Yeahoon and myself - Work on the VoodooPS2 Project for ALPS, its come a long way and is still in development here: https://osxlatitude.com/index.php?/topic/2545-new-touchpad-driver-for-e6520-alps/ @All - Debuging and helping out, without all of us, we wouldn’t be this far Myself (: - VoodooSDHC, Writing the guide, getting Deep Sleep Working 1. (Optional) Install alternative Wifi Card if you have Intel card 2. On a Mac or Hackintosh, download Mavericks from the Mac App Store, DO NOT INSTALL!!! 3. Extract the E6420.zip onto the desktop 4. Download the most recent MyHack and open and drag it to Applications, enter your sudo password, select “Create OS X 5. Installerâ€, then choose “Create OS X 10.9 Install Diskâ€, choose the USB drive you wish to use. 6. Rerun myHack and choose install extra, choose Extra, wait for all processes to finish 7. Reopen myHack and run myFix (quick) on your usb drive. 8. Push F2 during BIOS to enter setup, change SATA to AHCI, change fast boot to on, enable USB boot, apply and exit 9. Plug in your MyHack USB and push F12 at BIOS and select USB 10. Click continue on the first screen then Utilities ==> Disk Utility ==> Pick the highest level of your Hard Disk and got to the “Erase†tab and choose “Mac OS X Extended Journaled†and click “options†and select “Guid Partition Table†then click erase 11. Continue the installer, select yes to all options 12. After it installs click restart 13. Boot to the USB again and this time select “Mac OS X†14. Follow Setup Assistant 15. When you get to the desktop, Extract the E6420.zip 16. Now run the EDP installer from the Installers folder 17. Install necessary add ons to OS X that EDP asks for 18. Install Chameleon 2.2 (In installers) 19. Use Mac AppStore to update to 10.9.2 (or 10.9.4/5 if you want) (a must for audio to work) 20. (Recommended) Run the FakeSMC installer in the Installers folder 21. Open the VoodooPS2 Terminal.text and copy its contents into terminal and hit enter, then copy the VoodooPS2Daemon to /usr/bin 22. Open my Hack and run MyFix (Full), reboot. 23. (Optional) There are many programs in the “Installers†folder, you can install these programs if you want to, they helped me out immensely. 24. iGlasses app in the zip file get PhotoBooth Working 25.For Multitouch Gestures go to System Preferences ==> Keyboard ==> Shortcuts ==> Mission Control ==> Now chose the action you want (i.e. show dashboard) and click in the shortcut box, and do the gesture you want (it will show some weird keys, ignore it). 26. For Proper Keyboard, go to System Preferences ==> Keyboard ==> Modifier Keys ==> change Command Key to Option Key, and Option key to Command Key. 27. If you experience shutdown\restart issues, open your org.chameleon.boot.plist in textedit and change use kernel cache to no. 28. To get iCloud and Find my Mac working, download recoveryhd updater from osx86 (can't post link due to their download limits) and run it, reboot, check the icloud check boxes in system prefs. I will let you decide here... you can either have SD card functionality or Deep Sleep (normal sleep works either way), due to a conflict with the VoodooSDHC.kext in the attached extra folder, to get SD card reader working, just copy attached VoodooSDHC.kext to /Extra/Extensions and run myFix (quick) Congrats! Not Working Finger Print Reader (No clue how to fix… help would be appreciated) Headphone Jack (Temporary due to 10.9.2 breaking AppleHDA patches, will be fixed soon) This was caused on my model by a loose screw above the hard drive screws. Working Wifi (Athertos AR9281, recognized as native Airport Extreme oob, if you want one, the ebay auction is linked in my signature) Sleep Keyboard USB Bluetooth App Store and iMessage Screen Brightness Battery Percentage Boots Flag-Less (We are lucky) Display and Screen Resolution Audio Audio buttons and audio control HDMI (Auto Detection works!) QE/CI Network Switch Docking Port eSata Deep Sleep Free Fall Data (Can’t turn off) Smart Card Reader Express Card Reader Most Multitouch Gestures (3 and 4 fingers work) Webcam (Photo Booth as well) All Apple Logins (iMessage, etc.) VGA output (No Auto-detection) Find my Mac and iCloud Conflicts/Choices SD Card Reader (Use of the VoodooSDHC kext causes deep sleep to fail entirely, and after normal sleep, the reader refuses to mount cards) Installers.zip Extra.zip VoodooSDHC.kext.zip

Has anyone tried to install OSX 10.9 on an Latitude E6540 yet? Will there be a EDP available for the E6540 anytime soon? Hardware: Core i7-4800MQ AMD Radeon HD 8790M 8GB DDR3 Intel Ultimate-N 6300 AGN

OK folks i have a nearly perfect osx 10.9.5 install. the only thing not working that i have found so far is my bluetooth. it says on it BCM92046 and M960G and shows as a USB device which is a Dell 370 but also shows as a bluetooth device: http://www.capital-remarketing.com/dell-latitude-e6500-bluetooth-wpan-wireless-card-m960g-p-409.html the problem is that the bluetooth on/off switches in the OS are greyed out and when i try to connect a device it forever tries to connect but never does., I am using the standard dell 1.2 bluetooth kext and it just isnt there. any suggestions, anyone who has had this problem or know what i need to do? i am thinking maybe i need to edit the info.plist or something like that? any help, i am at my wits end with this thing....its working but not quite working aaarrrggg?

10.9 Install.app creation. Letest MyHack. Dell Latitude D830 Nvidia NVS140M 4 GB RAM 750 GB Hybrid SSD GPT I made my installer USB and when I boot the USB, the thing goes through all of the verbose messages and when I should've gotten a installer GUI, the screen is just black and nothing appears for over 20 mintues. Any help is nice. ***EDIT*** Installer log from the D630 pack. LOG.txt New Log.txt

i have been trying to get 10.9 onto my e6500 for days now without any luck. every time i end up with it telling me osx couldn't install and asking to view the log. this is before i even get into the installation right after it asks you to choose a language. normally i wouldnt start a new topic but i have looked everywhere and tried everything. i have tried with every option in my bios (A29) off and on and with -x -v pcirootuid=0,1 npci=0x2000,3000, -f, graphicsenabler=yes, and with various combinations of those tags (of course properly capitalized). anyone have any idea what i am doing wrong here? i used the current myhack download to install 10.9 onto USB and add the extra that is suggested on a page on this forum for building e6500's with mavericks. o yea and of course, after creating the usb installer a few days ago my other hackintosh crashed on me (gigabyte board with a Q6600 8gb PC6400, HD6850) and i havent had a chance to rebuild that install yet. so i have some experience with this stuff but this damn thing has me stumped... what bios is everyone else running too? as i said mine is A29. any ideas?? thanks yall e6500 A29 t9700 2.8ghz c2d 4gb nvidia nvs160m @ 1920x1200 currently running win7-64bit and ubuntu 14.04lts-64bit will install on a seperate hd i have tried also formatting my drives with Disk Utility to GUID with an HFS+ partition, and have tried MBR (the myhack install should have installed the mbr patch) but alas still no luck with either...

Updated 21 october 2013 - Fixed some text true the document - Rewrite of chapter 7 - Added new images for chameleon install and iMessage Error - Added section TROUBLESHOOTING - Added Boot 0 : ERROR in Troubleshooting - Added iMessage Error in Troubleshooting - New Install109.zip Run OSX Mavericks on a Dell Optiplex 780 This tutorial will describe the steps to install Mavericks on a Dell Optiplex 780 (this will also works on a 760). The installation goes to the latest version of 10.9, and when there is a new update i will change the tutorial as soon as possible. If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial. I have also included the PDF file of the guide and the zip file to install OSX Mavericks. A special thanks goes to Brian from Tech Erra for using parts of their tutorial. I am from The Netherlands so sorry for my bad English. 1. Credits/Sources Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide: Tech Erra OSX86 Wiki InsanelyMac Forum member Pingu from Germany for helping me out with the text changes. And all other forum members who have posted in my topic and helping out the community. 2. Requirements Here are the requirements: A Dell Optiplex 780 – This is necessary to install OSX Mavericks for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX Mountain Lion. Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy Mavericks 10.9 GM – If you don’t have a Mac Developer Account, then you’ll find torrents of 10.9 around the web. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.9 to – For me, I used a 500GB partition to install 10.9 to. An PCI Express Video Card – For use with QE and CI Highly recommended. I use a Ati Radeon HD5450 1GB but 512MB or 2GB also works. Install109.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. Note: The files for number 8 "Install109.zip" contains the following Directory's (4) and files: Kernel - Mach Kernel Kexts - FakeSMC.kext - NullCPUPowerManagement.kext - EliottForceLegacyRTC.kext - AppleIntelE1000e.kext - VoodooHDA.kext OSInstall - OSInstall - OSInstall.mpkg (Not used for my configuration because I use the entire hard disk) Utils - Chameleon-2.2svn-r2265 - Chameleon Wizard - Kext Utility - EFI Studio - ShowHiddenFiles The first 3.kext files will fix most kernel panics en bios reset that you might experience while booting. The 2 OSInstall files will allow you to install 10.9 onto an MBR-partitioned drive ( ! this is not tested, for further info go to insanelymac forum !). 3. My Specs My installation was successfully done on an Dell Optiplex 780 Desktop computer with the following specs. NOTE: A PCI video card is recommended to use the full potential of OS of Mountain Lion because the on board video card doesn't support QE/CI. Intel Core 2 Duo E7500 @ 2.93GHz 8GB DDR3 1333Mhz RAM Western Digital 500GB HDD ATI RADEON HD5450 1GB Intel WG82567LM onboard network Bluetooth USB Cambridge silicon radio (works OOB) ADI 1984A HDA audio onboard HP W2207h Monitor 1680×1050 display Apple Magic Trackpad Apple Wireless Keyboard US 4. Preparing your SSD or HDD for install on a MBR-partitioned drive If you intent to install OSX86 Mavericks on the same Hard disk as your windows follow the steps below. For a clean install on a new formatted hard disk go to Chapter 5. If you’re in Windows 7, you can easily make a new partition on an SSD or HDD via the Disk Management program. Start>Run (or Windows key on your keyboard plus R). diskmgmt.msc (press enter after typing that) Find your drive, right-click on it, and go to Shrink Volume. Wait for it to calculate the amount of space you can make your partition, and enter in your amount (for an exact GB amount, multiple your desired amount of GB times 1024, so a 20GB partition would be 20480MB). Let it make your partition. It will show up as unallocated space. Format the new unallocated space as NTFS and give it a label (mine was Mavericks). Done! 5. Formatting your USB drive Start OSX Mountain (Lion) or Snow Leopard to prepare your USB Flash drive Make sure to backup the files that are already on your USB flash drive via Disk Utility in Mac OS X: Extract the zip file Install109.zip to your Mac OS x desktop Put USB drive in your Mac Open up Disk Utility. Click on your USB drive in the left sidebar. Click on the Erase tab in the middle. Choose “Mac OS X Extended (Journaled)†as the format, and give your drive a label (like “MAVERICKS USBâ€). Click on the Erase… button. Done! Leave Disk Utility open, as you’ll need it later. 6. Preparing your USB drive with 10.9 This part is the most time consuming. Using a USB 3.0 flash drive will help things out quite a bit. Mount the DMG for Mavericks (will be called Mac OS X Install ESD on your desktop). Show hidden files by running the app ShowHiddenFiles in the folder Install109 - Util on your desktop. Click on Show Special Files (leave the app ShowHiddenFiles open we need this later). In the folder MAC OS X Install ESD right click on Basesystem.dmg and choose “ open with DiskImageMounter(default) Switch back to Disk Utility. Click on your flash drive in the left sidebar. Click on the Restore button in the middle area. For the source, drag “Mac OS X Base System†from your desktop into the empty Source box. For the destination, drag your USB drive from your desktop into the empty Destination box. Click on “Restore†and type your password. This process will take anywhere from 5 to 10 minutes depending on the speed of your flash drive. When it’s finished, you’ll end up with 2 “Mac OS X Base System†drives on your desktop. Figure out which one is your USB copy (you can right-click > Get Info and use the capacity as an indicator), and rename it to MAVERICKSUSB, after that open it up. Once you’ve opened up MAVERICKSUSB (the one that’s your flash drive), go to /System/Installation. You’ll see a symlink for Packages. Remove it. Create a folder called Packages. Open up a window of the original Mac OS X Install ESD drive and copy everything within Packages to the empty Packages folder on your USB drive. Done! 10.9 is now installed onto your USB drive. Now, we need to modify some of the files on it so that it will properly bootup on a PC. 7. Adding the fixed 10.9 files to the USB drive Now, we need to modify some of the files on your USB drive so that it will properly bootup on your PC. Open the folder “Instal109 - Kexts†on your Mac OS X desktop. Copy 3 .kext files (FakeSMC.kext, NullCPUPowerManagement.kext, EliottForceLegacyRTC.kext) to /System/Library/Extensions on your flash drive. NOTE: The 2 OSInstall files will allow you to install 10.9 onto an MBR-partitioned drive, if you install it on the entire hard disk skip step 3 and 4 an go further with step 5. Copy the OSInstall file to /System/Library/PrivateFrameworks/Install.framework/Frameworks/OSInstall.framework/Versions/A/, overwriting the file that’s already there. Copy the OSInstall.mpkg file to /System/Installation/Packages/, overwriting the file that’s already there. Go to the root of your USB drive and create a folder called "Extra". This is used to store configuration files for the chameleon boot loader Run the Chameleon installation package from Install - Utils. Make sure to install this package to your flash drive. Choose in the Chameleon setup for Customize, in the customize screen choose Modules – FileNVRAM ( we need this to make iMessage work) after that go further with the install of Chameleon. Run the Chameleon Wizard click the “SMBios†tab then click "Edit". Now there is a list of “Premade SMBiosesâ€. Look through this list and choose for your Dell Optiplex 780 the iMac9.1. Click “Save As†and save it to the /Extra folder we created on the USB stick. Choose Tab Org.Chameleon.boot and set the follow options like in the image below. If the settings are like the image then Click “Save As†and save it to the /Extra folder we created on the USB stick. Copy mach_kernel from the Folder Install109 - Kernel and paste it into the root of your flash drive. Lastly, copy extracted folder (Install109) which you have extracted earlier from the zip file to the root of your flash drive. You’ll need this in Chapter 12 Eject all mounted drives (this is not necessary) Go to ShowHiddenFiles and click hide special files after that close program. Eject your USB Drive Done ! 8. Bios Settings Dell Optiplex 780 Before we boot from the Dell Optiplex we need to optimize the bios for OSX Mavericks. Start your Dell Optiplex and press F2 to get into the Bios. Go to Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to Drives - Sata Operation and choose on the right for Raid Autodetect/AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Mavericks. 9. Installing OSX Mavericks from your USB drive Time for the fun stuff! We’ll now boot from your USB drive and install OSX Mavericks onto the partition or Hard Drive. Boot from your USB drive. Once in Chameleon let the boot loader resume (or hit enter to start it manually highlight your flash drive and add -v -f to the end, then push enter. You’ll see a lot of text fly by be patience startup may take a while.) Once you get into the installer (assuming your computer didn’t freeze, restart itself, or get a kernel panic), choose your partition or Hard Disk to install OSX Mavericks to. NOTE : when you install it on a partition skip step 5 - 10 see Chapter 4. (If you install Mavericks on the entire Hard disk follow the steps below ) In the installer open up Disk Utility. Click on your Hard Drive in the left sidebar. Click on the Erase tab in the middle. Choose “Mac OS X Extended (Journaled)†as the format, and give your drive a label (like “MAVERICKSâ€). Click on the Erase… button. Done close Disk Utility and go further with the installation process. The installation process will take about 5 to 15 minutes, depending on the speed of both your USB drive and your SSD or HDD. When finished boot to your new OSX Mavericks. 10. Booting OSX Mavericks! Now that everything is finally prepared, you can go ahead and boot into OSX Mavericks. Boot from your USB drive again your computer won't still be able to boot from the hard drive. 2. Once in Chameleon let the boot loader resume (or hit enter to start it manually highlight your flash drive and add -v -f to the end, then push enter. You’ll see a lot of text fly by be patience startup may take a while.) You’ll eventually get to the setup screens for OSX Mavericks. Go through that process to setup OSX Mavericks. Choose by "How Do You Connect" for "My Computer Does Not Connect to the Internet" we will fix this later in Chapter 12, go further with the installation process. The installation process will take about 3 minutes. Done! Proceed to Chapter 11 to install the bootloader to your partition so that you don’t have to rely on using your USB drive to bootup. 11. Installing the bootloader to 10.9 Once in 10.9 go to finder – preferences –General and choose in show these items on the desktop for - Hard Disk - External Disk - CD Go also to System Preferences – Security& Privacy click on the lock on the left corner and type your password Choose by “Allow applications downloaded from: for “Anywhere – Allow from anywhere Close system preferences. Navigate to your folder Install109 -Utils and run the chameleon package, install it to your OS X drive. Copy the Extra folder on your USB drive to the root of your HDD (open Finder -> Go -> Computer -> OS X -> paste folder). Done! 12. Install the Kext files for de Dell Optiplex 780 hardware Now, we need to install some Kext files on your Hard Disk drive so that the hardware will work properly on your PC. Open the folder “Install109 - Kexts†and select the following Kext files - AppelIntelE1000e.kext - EliottForceLegacyRTC.kext - FakeSMC.kext - NullCPUPowerManagement.kext - VoodooHDA.kext Drag the Kext files (which are mentioned above) over "Kext utility.app" (contained in folder “Install780â€) and release the mouse Type your root password and the Kext files will be installed on your Hard disk. Reboot. Once in OSX Mavericks go to System Preferences – Network There will be a message saying “Network device is detected†Choose apply if you want to use DHCP or give a IP Address if you use static IP. Click apply to make the setting active. 13. Installing Video for QE/CI Manually Copy the Kext files AMD5000Controller.kext and AMDRadeonX3000.kext from system/library/extension to your desktop. Go to AMD5000Controller.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>IOPCIMatch</key> and add your string for HD5450 ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002) <string>0x68F91002 0x68981002 0x68991002 0x68E01002 0x68E11002 0x68D81002 0x68C01002 0x68C11002 0x68D91002 0x68B81002 0x68B01002 0x68B11002 0x68A01002 0x68A11002 </string> Save and Exit Go to AMDRadeonX3000.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>AMDCedarGraphicsAccelerator</key> and then look for the first <key>IOPCIMatch</key> and add your string for HD5450 ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002) add <string>0x68F91002 0x68E01002</string> Save and Exit Install both kext files with Kext Utility Now reboot. After Reboot the video card must be working with QE/CI. TROUBLESHOOTING 14. BOOT 0 ERROR If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following Reboot system back into Mavericks installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Mavericks on Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 Exit Terminal Boot Normally 15. App store and iCloud doesn't work If AppStore and iCloud doesn't work follow the steps below. Open up EFI Studio in folder “Install109 - Utils.†, select Ethernet, select Add Device. On the new window you will see a lot of numbers (Hex String) in the second row. Then clicked write to com.apple.boot.plist. Then go to /Library/Preferences/SystemConfiguration/apple.com.boot.plist and select the new key and string it added. Now you can add the Hex Strings to your org.chameleon.boot.plist(com.apple.boot.plist) see Chapter 12 which should be in root/extra folder. When you add it manually make sure it is in <key>device-properties</key> <string>Your Hex String here</string> arguments after that. Remove all network devices from System Preferences/Network. Delete in library>preferences>system configuration> NetworkInterfaces.plist file. Finally, Reboot. After reboot, go to System Preferences/Network add devices. Click (Ethernet) FIRST!! Then add the other adapters you use to connect to the internet or Bluetooth. Voila. App Store and iCloud now works. 16. iMessage Fix Hackintoshes have been unable to log into the Messages app (better known as "iMessage") on OS X Mountain Lion and Mavericks. We can now fix the problem using Chameleon bootloader. Run the Chameleon installation package from Install - Utils. Make sure to install this package to your HDD. Choose in the Chameleon setup for Customize, in the customize screen choose Modules – FileNVRAM after that go further with the install of Chameleon Finally, Reboot Voila. iMessage now works 17. If sound doesn’t work The HDMI from the Ati Radeon 5450 doesn’t work properly so we need to change this to Headphone, follow the step below to make sound work. Open System Preferences – Sound – Output – And choose for Headphones.18. Finished! You’ve successfully installed OSX Mavericks onto your Dell Optiplex 780. Install109.zip run os x mavericks 10.9.pdf

Hi, New dell here but in need for some hints about running Maverick on the following specs. Myhack installation is ok but afterwards also no usb/audio and fails on graphics because -x works Clover has the same issues so possible some hints toward the right files would be awesome. specs: CPU: I5-4310u with intel hd 4400 8GB ram Dell E5440: 00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b) 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b) 00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I218-LM (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 1 (rev e4) 00:1c.3 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 4 (rev e4) 00:1c.4 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 5 (rev e4) 00:1d.0 USB controller: Intel Corporation Lynx Point-LP USB EHCI #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point-LP LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point-LP SMBus Controller (rev 04) 01:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) 02:00.0 PCI bridge: Wilocity Ltd. Wil6200 PCI Express Root Port (rev 04) 03:00.0 PCI bridge: Wilocity Ltd. Wil6200 PCI Express Port (rev 04) 03:02.0 PCI bridge: Wilocity Ltd. Wil6200 Wireless PCI Express Port (rev 14) 03:03.0 PCI bridge: Wilocity Ltd. Wil6200 Wireless PCI Express Port (rev 14) 04:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01) lspci -nn pcilib: 0000:00:02.0 64-bit device address ignored. 00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:0a04] (rev 0b) 00:02.0 VGA compatible controller [0300]: Intel Corporation Unknown device [8086:0a16] (rev 0b) 00:03.0 Audio device [0403]: Intel Corporation Unknown device [8086:0a0c] (rev 0b) 00:16.0 Communication controller [0780]: Intel Corporation Unknown device [8086:9c3a] (rev 04) 00:19.0 Ethernet controller [0200]: Intel Corporation Unknown device [8086:155a] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation Unknown device [8086:9c20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:9c10] (rev e4) 00:1c.3 PCI bridge [0604]: Intel Corporation Unknown device [8086:9c16] (rev e4) 00:1c.4 PCI bridge [0604]: Intel Corporation Unknown device [8086:9c18] (rev e4) 00:1d.0 USB controller [0c03]: Intel Corporation Unknown device [8086:9c26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Unknown device [8086:9c43] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation Unknown device [8086:9c03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation Unknown device [8086:9c22] (rev 04) 01:00.0 SD Host controller [0805]: O2 Micro, Inc. Unknown device [1217:8520] (rev 01) 02:00.0 PCI bridge [0604]: Unknown device [1ae9:0101] (rev 04) 03:00.0 PCI bridge [0604]: Unknown device [1ae9:0201] (rev 04) 03:02.0 PCI bridge [0604]: Unknown device [1ae9:0201] (rev 04) 03:03.0 PCI bridge [0604]: Unknown device [1ae9:0201] (rev 04) 04:00.0 Network controller [0280]: Atheros Communications Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01) *Update Started over with a clean myhack: resulted in reboot loop/no error visible. Added bootpack found here to myhack: resulted in reboot Added different SSDT.aml found here to bootpack/extra: result = ok and without any boot options (loaded the extra folder when the installer asked for this) \==> this step gave me from here a succesvol instal followed by a working hackintosh (see below for the list of kext's) Not working: Wifi/bluetooth: sadly no go unless some genius fixes this. Audio: looking for a fix. speedstepping? sleep Clover: how to transform chameleon config to Clover config (work in progress) In attachment my dsdt dump for those who can look into it. *kexts currently in use in /Extra/Extensions AppleACPIPlatform.kext EAPDFix.kext AppleHDA.kext FakeSMC.kext AppleIntelCPUPowerManagement.kext GenericUSBXHCI.kext AppleIntelE1000e.kext IOAHCIFamily.kext AppleSmartBatteryManager.kext VoodooPS2Controller.kext DisableTurboBoostBattery.kext lspcidrv.kext System DSDT.txt

E6520 with NVS 4200M disabled and HD3000 (Optimus Enabled) working on Mavericks (10.9) including sleep. Here is a list of what's working: - shutdown and restart using dsdt.aml - video Opetimus enabled (disable NVS4200) to get the sleep working - used Mbeast for - patched AppleIntelCPUPowerManagement - ethernet using hnak's AppleIntelE1000e v2.5.4d -> v2.4.14 - sound using VoodooHDA v2.8.4 -> fixed AppleHDA - hardware monitoring using fakeSMC v5.3.820 and plugin - 3rd Party SATA - TRIM enabler 10.9.0 - battery using VoodooBattery -> ACPIBatteryManager - touchpad using VoodooPS2Controller by RhabmanMerg - turboboost to 3.2Ghz using ssdt.aml generated from RevoGirl's blog - replaced wifi card, so the out-of-the-box AirPort works - SDHC card working with VoodooSDHC - provided by heemsker below; then disabled it to get sleep working All the relevant files are attached. The way I was able to install Mavericks was using MBeast. MBeast and having another partition with somewhat working Mountain Lion (10.8). I created an installation partition using MBeast and ran MBeast against the partition in order to boot and install Mavericks. Once Mavericks was installed, I had to boot from ML partition and run MBeast and put the dsdt.aml. Then, I installed the other extensions one by one. I was also able to follow the link below to install Mavericks using myHack. Changed couple of kext to latest: - patched AppleIntelCPUPowerManagement - ethernet using hnak's AppleIntelE1000e v2.5.4d -> v2.4.14 - hardware monitoring using fakeSMC v5.3.820 and plugin - TRIM enabler 10.9.0 - VoodooPSController for Trackpad allows multi finger action Change Log: 03-13-14: 10.9.2 update and sound working again (attached EE myHack Mavericks 10.9.2 03-13-14) - AppleHDA provided by Jake Lo - Removed npci=0x2000 kernel flag and kexts (AppleACPIP2Nub and GenericUSBXHCI) suggested by El Capitan - Was not able to boot if AppleACPIPlatform kext is removed. Keep it for now. - Still using Chameleon r2266. r2377 will precent booting with a Memory Allocation error. chimera (chameleon, stolen and rebranded) v2.2.1 will boot, but no sound. 01-12-14: - Sleep working now following the instruction here https://osxlatitude.com/index.php?/topic/5943-dell-latitude-e6520-with-optimus-enabled-mavericks/&do=findComment&comment=32152. - Sound working with Jake's AppleHDA; removed VoodooHDA - Trying ACPBatterManager; removed VoodooBattery - Not sure about AppleKextExclude provided by Jake. Trying it out Attached revised myHack files. 11-24-13: Updated EE and SLE download to include VoodooSDHC to get the smart card working. 11-24-13: Updated myHack Extra to use VoodooBattery allowing overclock to 3.2Ghz. AppleStartBatterManager and DisableTurboBoostBattery combination previously included for some reason disabled turbo boost using SSDT. 11-14-13 original post Credits: - OSX Crew - Disable NVS4200M and using H3000 (Optimus enabled) - E6520 on Mountain Lion by lgashu https://osxlatitude.com/index.php?/topic/1689-dell-latitude-e6520-mountain-lion/ - collection of 10.9 kext from iFail - ssdt generation - RevoGirl's blog - touchpad - RhabmanMerg - SDHC - heemsker - others that I missed EE and SLE for E6520 on Mavericks.zip EE myHack for E6520 on Mavericks.zip EE myHack for E6520 on Mavericks 11-24-13.zip EE and SLE for E6520 on Mavericks 11-24-13.zip Extra myHack for E6520 on Mavericks 01-12-14.zip EE myHack for E6520 on Mavericks 10.9.2 03-13-14.zip

Hi, I used my hack yo create installer but unable to install. I then used unifail method and installed maverick on my usb hdd. but i am not able to use trackpad or mouse so unable to do anything Please help me.The usb ports are working fine Lenovo G580| i7-3612QM 2.2GHz | 6GB DDR3 | intel HD4000 1366*768 ! nVidia 610M not working| Mountain Lion 10.8.5 | Sleep, No

Help! I've almost got my 10.9 installation working like a charm on my E6530. Even the trackpad and keyboard and working, but even after replacing the original Intel Wireless with a DW1510 I purchased off eBay I've not been able to get the wireless working. System profiler can see networks and it looks like the drivers for the card are installed and working, but trying to get it to choose a network fails every time. The menu bar icon causes a beach-ball whenever clicked on and the System:Network prefpane won't let me choose a network (drop down is greyed out). Screenshots attached showing pretty much all relevant screens. I've rolled back airportd and I've also tried the work-around where you go via "Assist me..." to select the network, but that always results in my wireless password being refused (despite definitely being correct). I'm a bit at a loss. I've tried using MyHack to rebuild the kernel caches etc. Hasn't helped. My next step is to try and re-brand the card with an Apple device id, but I'm also struggling to get the card to rebrand, basically when I do the `find /sys/devices -name ssb_sprom` step there's no results returned. It isn't due to multiple entries either, there's just no results. I'm not sure whether this is related or not at the moment... I'm at the hair pulling out stage, so any advice or tips on what to check next would be gratefully received!