Bronxteck

have you tried rebuilding you caches? also maybe you neead EAPD fix for audio

you can try https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads/for usb for the display port are you sure your cable is audio capable? some are not.

DellSMbiosPatch is a fix for some dell models that truncate the smbios instead of showing the whole identifier like Imac11,1 would show up as maybe imac11 in about this mac

it looked self explanitory to me..... but to recap..... HDMI does not work on NVS4200m machines.

make sure the wifi is not off in bios or on the wifi switch. you will need lilu kext and its plugin AirportBrcmFixup.kext. for BT you will probably need rehabman BrcmFirmwareData.kext and BrcmPatchRAM2.kext you must also make sure the BT device shows on your usb bus if not you will have to first correct that issue. no device no kext will load. you can install and run all the kexts from clover.

no there is not one at the moment but search the forum there are a few "works in progress" maybe some of there info can help you along

thanks Chris for remembering us LOL...

you guys are using these patches? https://github.com/alexandred/VoodooI2C-Patches

if you cant use apple trackpad prefpane then you need to edit trackpad info.plist inside kext

boot from recovery and run first aid on your drive. looks like it has corruption. maybe a bad install. there also might be something going on with your slide value.

does your trackpad have a Fn option to disable/enable trackpad? if you do then try toggling it to see if it reactivates maybe the hardware needs to be reloaded.

did you update clover between reboots or recently? if so you need to update/ change your kexts to patch section in config plist to use full bundle id for kexts to patch

if you still have an nvram .plist the old values might be getting read so remove it entirely make sure there is not one in EFI or on root of osx volumes. or maybe you need to reset nvram from clover gui you can press F1 at clover prompt for instructions.

the machine should not be generating an nvram.plist if you set it up properly that is only needed for RC scripts and emuvariable. if you remove it and it is still regenerating recheck that you followed our suggestions.

do you have -disablegfxfirmware defined in you boot flags I think the EXX70 series needs that osxAptioFix3Drv is an older version of AptioMemoryFix and as so AptioMemoryFix is maintained by it's developer so it has updated code compared to osxAptioFix3drv Should I pick them again now where the startup and nvram is fixed? ​answer is no you only need that a for emulated NVRAM

try adding FixHeaders ACPI patch in clover ACPI section. you can use something like clover configurator app to edit config or just try selecting it from clover's boot GUI options

native nvram only works with one of these options; AptioMemoryFix or OsxAptioFix3Drv AptioMemoryFix is a better option then OsxAptioFix3Drv. you need to remove/unselect any other version and also remove RC scripts and emuvariable if you get boot issues then you might have to add boot flag slide=0 I have attached a clover installer that has both options Clover_v2.4k_r4416.zip

maybe try karabiner elements app

you might need nvidiagraphicsfixup lilu plugin plus lilu

adjust the values to your liking in the kexts info.plist go to post number 1 for more details.

there have been changes to clover config and osxaptiofix drivers between your versions. kext to patch; kext bundle identifiers need to use the full names not short names like previous. osxaptiofix's are depreciated it is now recommended to use osxaptiofix3 or aptiofix driver if available (this is where you might be getting the +++++++ issue) there is also a new acpi option called fixheaders that tends to be needed for 10.13.x and also for 10.13.x you might need APFS.efi added to clover drivers. you can see the clover change-log here

your welcome and thank you.

if you want stability you might want to stay on 10.12 and do like Jake mentioned and make a second partition to do your testing for 10.13 it really is not better at all.... lol super buggy.

yes clover changed kext to patch requirements. right now you have short names for kext to patch identifiers names. you have to use full bundle id names. go to system information app then software tab and select extensions. let it populate and look for all the kexts you need to update in your config.plist then select it. the bundle id should show like this Bundle ID: com.apple.driver.AirPort.Brcm4360 copy com.apple.driver.AirPort.Brcm4360 and paste it into kext name replacing the short version which you have as AirPort.Brcm4360 do the same for all your other kext patches.

retry uploading the files. uploads should be ok now just make sure to compress when attaching