Jump to content

Bronxteck

Administrators
 View Profile  See their activity

  • Posts

    5778

  • Joined

  • Last visited

  • Days Won

    124

 Content Type 

Everything posted by Bronxteck

  1. Bronxteck
    you need to update your lilu then it might be to old for the version of AirportBrcmFixup.kext you are using also update any other lilu plugins at the same time. if all else fails try adding your own ip in your routers range that does not conflict with other devices.
  2. Bronxteck
    Try F12 Boot Selection or check bios boot order. also post a picture of the Kernel Panic
  3. Bronxteck
    it is your OsxAptioFixDrv.efi driver remove it and update /Replace it with AptioMemory fix in the clover installer options. Clover_v2.4k_r4418.zip
  4. Bronxteck
    if you modify the config file directly the changes should be permanent. also make sure you do not have a second clover EFI folder somewhere like in root or on a different partition it can cause issues like what you are having. sometimes chooses one sometimes chooses the other.
  5. Bronxteck
    have you checked Herve or jakes signatures they might have links to E6x20 family machines. they should hopefully be close enough to get you installed then after we can work out the bugs left the usb dying I think is a known issue. if I remember the solution was to change USB ports when that happens
  6. Bronxteck
    the display sounds like your nvram might not be working properly.
  7. Bronxteck
    have you added the intelgraphicsfixup and shiki Lilu plugins? they should take care of the safari freeze if your using the on board intel graphics
  8. Bronxteck
    well on 10.13.x now you have to select the "installer" partition sometimes more then once from clover menu when doing updates for it to install the update.
  9. Bronxteck
    how about bios then? you can also try in terminal http://osxdaily.com/2011/05/31/enable-disable-airport-wireless-connections-command-line/ or taping pin 20 on the wifi card with a piece of scotch tape
  10. Bronxteck
    well being a tower form factor at least it has room to expand if things do not work out of the box. worst case I guess you can always add a graphics card or a hard drive. maybe you can see if any Macs used the same hardware by cross checking at everymac.com you can do a sort then look at intel macs only to cross reference. that should also give you an idea of what SMBIOS profile to emulate for your machine. I would think it might be some sort of Mac Pro. at least by cross referencing you have a better idea what your up against. you can also try google some of the parts or chipsets and add the words osx or Mac to the search
  11. Bronxteck
    wifi says status "off" did you check the wifi switch?
  12. Bronxteck
    have you tried shining a light into the lcd to see if you see the desktop? maybe it is a backlight issue?
  13. Bronxteck
    you would have to swap both lids and the video cables to confirm your issue. you might also have to enable dual link =1 patch on the high resolution lid.
  14. Bronxteck
    this is supposedly for a t440 but maybe it helps https://github.com/coderobe/AzulPatcher4600 did you try as I suggested and leave all the ig-platform patching to clover then check your clover boot log?
  15. Bronxteck
    check to see it it shows on your USB bus. there are usb kext changes between sierra and high sierra. you might need to update your clover usb patches
  16. Bronxteck
    he might only need the IntelGraphicsFixup from those kexts above he should also add shiki and lilu they should correct a few graphics glitches and youtube / safari issue freeze. also if you just use inject intel in config the newer clovers will auto detect all the parameters for you like ig-platform and whether it is high resolution or low. it would show in the clover boot log. in my case i also need the rehabman fakepcid kexts as Herve linked too and the smbios MacBookPro11,1. also are you sure you have HD4600 on a mobile? ususally its a HD4400 or HD4200 which has to be faked to HD4600 as Herve also mentions.
  17. Bronxteck
    http://cvad-mac.narod.ru/index/bootdiskutility_exe/0-5it might also download the apple installer you can use this to edit config https://bitbucket.org/kylon/cloud-clover-editor-cce this to edit dsdt if you need to https://bitbucket.org/kylon/cloud-acpi-editor all should work from windows there are also ways of mounting efi from windows depending on what version you are running
  18. Bronxteck
    might start something like .ai so it will be hidden because it starts with a period
  19. Bronxteck
    if your issues is just remapping keys you can try karabiner-elements
  20. Bronxteck
    did you try unselecting WWAN from your second bios screenshot the switch control one.
  21. Bronxteck
    ACPI error could be because you removed drop DMAR
  22. Bronxteck
    looks like it. does it show in bios? also check if bios has WWAN option for switch and disable the option if you can.
  23. Bronxteck
    or maybe this https://github.com/lvs1974/NvidiaGraphicsFixup/blob/master/FAQ.md with lilu
  24. Bronxteck
    try lilu.kext and whatevergreen.kext you might have to add some boot flags for whatevergreen instructions would be on the source page readme.
  25. Bronxteck
    do you think maybe a pin mod would work as it did with wifi and bt herve? like taping pin 20 https://ltefix.com/wp-content/uploads/2017/08/MC7750-Product-Technical-Specification.pdf table 4-1
×
×
  • Create New...