Jake Lo

@k9wolf What audio issue would that be? Need detail of your issue, can't help with such vague question.

post your files Both camera and BT are USB related issue. You need to fix your ports configuration. Try using Hackintool.app

Hmm, "Mach Reboot", that should've been fixed with FixHeaders enabled in the Config file. What version of Clover are you using?

Try this Config and delete SSDT-HDEF.aml. It's conflicting with your Config file with different layout-id. config.plist.zip

VoodooPS2Controllerfrom Rehabman is for Synaptics touchpad, not Alps. Replace it with the one you're using with 10.14.x

Are you using the USBPort.kext or the SSDT-xx + USBInjectall? Post the generated files files

Yes, try testing other layout-id's

I have the same problem using the same eDock. No solution so far

Don't need DSDT, it's all hot patched

It's outlined in my Catalina guide here. Look under grading to Catalina

Yes, try. I can't test for you since I don't have your hardware.

Try this, replace contents into /EFI/Clover 3400.zip

No Config.plist file found in your EFI folder nor DSDT.aml / SSDT.aml HDMI is hardwired to the NVS5200m card, so you might have to disable Optimus Try guide and files from here https://www.insanelymac.com/forum/topic/327824-dell-latitude-e6430-full-solution/

post screenshot of error

Does this occur before the changes on reboot?

Remove the following kext: ApplePS2Controller.kext AppleBacklightFixup.kext Install the kexts found in CopyToLE to /L/E especially CodecCommander to fix the headphone The other 3 kexts are for Bluetooth. Add the attach *.aml to /E/C/A/Patched. I2C = touchpad ALC256 = fix audio after wake Replace Config file, made a few adjustment. fixes.zip

You can try with my Clover guide here and use the attached bootpack. Files goes into /EFI/Clover replacing the old 5580_DiscreteDisable.zip

They are already enabled in the bootpack in my guide that doctorultra linked above

Don't need the patch, it's already named "EC" Just update the kexts primarily Lilu.kext and Whatevergreen.kext and AppleALC.kext

Try replacing VoodooPS2Controller with Rehabman's https://bitbucket.org/RehabMan/os-x-voodoo-ps2-controller/downloads/

Tried using your Clover folder, no issue. Brightness Control works fine. You should remove SMCHelper.efi since it's for FakeSMC.kext and you're using VirtualSMC. Other than that I think you might try resetting your BIOS to load the Default. Save reboot back to BIOS and set it to UEFI enable AHCI enable Legacy Option ROMS disable Secure Boot disable TPM disable Wake on AC off Wake on WLAN/Lan off

Remove EmuVariableUefi.efi from /EFI/Clover/driversUEFI You already have AptioMemoryFix.efi. Use one or the other, not both. You need to enable "Drop OEM" in Config file since you're using a static DSDT.aml Try adding this patch for the Caddy drive Kext: AppleAHCIPort Find: 40600200 Replace: 00000000 As for the side switch, that's as good as it'll get. There's no physical toggle switch on a real Mac.

try booting with boot arg until complete -igfxvesa

What's the source of your installer? Vanilla or Distro like Niresh?

Looks like you're combining 2 different bootpacks together. Download bootpack here and REPLACE again to /EFI/Clover But keep the following kexts in /EFI/Clover/kexts/Other since they are more updated than files in the bootpack WhateverGreen.kext Lilu.kext AppleALC.kext