Jump to content

Bronxteck

Administrators
 View Profile  See their activity

  • Posts

    5778

  • Joined

  • Last visited

  • Days Won

    124

 Content Type 

Everything posted by Bronxteck

  1. Bronxteck
    you might need more ram. it is probably using your HDD for the swap file. or it is still indexing your drives contents.
  2. Bronxteck
    maybe try a different usb stick not all usb pens are bootable .
  3. Bronxteck
    do you have vbox or hfsplus in clover efi folder
  4. Bronxteck
    i think you had to use an older trackpad prefpane. it might be buried somewhere in this thread.
  5. Bronxteck
    at clover prompt remove ig-platform id and only use inject intel. see if clover detects it for you
  6. Bronxteck
    does haswell need plugin type 1 i dont see it in config or is it in SSDT
  7. Bronxteck
    check at clover boot GUI if intel graphics injection is enabled. also what version of clover are you using? 4061 has intel graphics boot issues latest downloadable built version is 4077 which should be fine.
  8. Bronxteck
    if you are using Kozlec branch of FakeSMC.kext try switching to Slices version it adds some missing SMC values into nvram.
  9. Bronxteck
    try booting clover without intel graphics injection
  10. Bronxteck
    with trimforce command you dont need the clover patch
  11. Bronxteck
    maybe your not at the same sierra version as him or maybe its DVMT allocation issue. at clover prompt try disabling intel graphics injection.
  12. Bronxteck
    you can try tlucks version from here https://github.com/tluck/OS-X-Voodoo-PS2-Controller Tluck voodoops2.zip
  13. Bronxteck
    i believe herve was referring to "Your DW1560 is either not in a WWAN slot (mandatory to get Bluetooth over USB) and/or your USB ports are not all functional (you would need to patch your DSDT to rename EHCx devices to EH0x and install a USB injector kext)."
  14. Bronxteck
    I would start by comparing the bios settings from the "good" machine to the other. make sure there both on the same level playing field since OS wise everything else was the same. also try swapping batteries and power supplies. an inadequate battery or power supply can also sometimes cause the machine to get stuck in a low power state and not throttle properly
  15. Bronxteck
    maybe check your computers bios to see if your graphics card settings changed.
  16. Bronxteck
    is it showing in usb? check your bios options and the switch on the machine. or reseat the card in another slot
  17. Bronxteck
    try booting with HDMI connected.
  18. Bronxteck
    globs of thermo paste will not cool. you will have to put the blue pad back or use copper shims in it's place.
  19. Bronxteck
    did you install a bootloader to the HDD or transfer your usb EFI over to the HDD?
  20. Bronxteck
    i would think that using a bootpack for your specific os version would be a better fit then one that's not.
  21. Bronxteck
    that would be smbios configuration related. it must have changed in your config. if you are not specifying one in your config then maybe your bootloader is selecting it for you
  22. Bronxteck
    try with this clover since 4061 has issues with intel graphics. Clover_v2.4k_r4076.zip
  23. Bronxteck
    try sudo pmset hibernatemode 0 in terminal
  24. Bronxteck
    at clover prompt press the space bar and select verbose output. then post pic
  25. Bronxteck
    https://github.com/vit9696/Lilu
×
×
  • Create New...