Jake Lo

Exx20 AppleHDA

Did you look at the updates on the bottom of the guide? I believe adding HDAEnabler and the new AppleHDA should fix the audio. For iMessage, click on the iMessage link on my signature file below for instruction to fix it. As for Brightness, did you try Fn+F3(scrollLock) /Fn+Insert(Pause)? If that doesn't work, try Brightness Slider.app.

Please specify your CPU, video card, display resolution, etc...

That could be because you have an intel wireless card. That's not supported, you'll need to replace it. Click on Wireless Cards on my signature below for list of supported/unsupported cards. To confirm, from terminal run lspci -nn. See what you have on your system.

Yes, but without QE/CI. See my post here. More info here.

Can you confirm you have the nvidia card and not the Intel display card?

What's your hardware specs?

The guide will only work for the Intel HD3000 graphics. Use this guide instead. Unless you want to use the Nvidia card, follow this guide.

Hard to say since you didn't specify what wireless card you have. If you have an Intel Wireless, it's not supported and will need to be replaced. Click on wireless cards on my signature file below for list of supported/unsupported cards.

Try this boot pack. Use myHack method Extra.zip

It's actually more like E5540. Check out this thread, has a boot pack you can try too.

Check org.chameleon.boot.plist that you don't have the partition hidden

Quite a journey, but congratulations getting thus far. For bluetooth, try clicking on Bluetooth link on my signature below, some good info there For Wireless, mostly like you have an Intel Wireless, not supported. click on Wireless Device on my link below for supported/unsupported ones Dual booting, check this guide. works! Can you download Chameleon Wizard or MaciASL and export a clean DSDT file, and attach it here. We can try to patch it and make your system run better. Cheers

Can you boot with -v switch and report where it error out? Just "crash" is NOT enough for us to help you.

Here you go. Using pokenguyen's patches for E7x40 DSDT-ckleea.aml.zip

Follow guide here to do your build, you'll need BIOS version A11, otherwise you'll encounter artifacts. Make sure to select your secondary drive as the destination! Once booted, we'll work on getting the correct ssdt file for your processor.

Intel Wireless are not supported and probably never will. Click on Wireless card link on signature below for a list of supported/non supported cards. Dell does not have whitelisting, so no BIOS mod will be needed.

Helped a friend install Mavericks on this. It's different from the one in compatibility list as this one doesn't have Sandybridge processor, but the 1st Generaion i5. I got most things working, but I no longer have the laptop. This guide and bootpack should get you up and running, but might need more tweaks for power management. Credits: Special thanks to myHack (conti) Pokenguyen - Patched DSDT for sleep Rehabman - Touchpad scrolling qwerty12 - DisableIntelTurboBoost for Power Management GhostRaider and everyone mentioned in his guide to get 1st Gen. HD Graphics working as well as it does Specs: BIOS Insyde F.26 | i5-460M | 8GB Ram | Intel GMA 5700mhd, 1366x768 | Rebranded Dell DW1510 | Mavericks 10.9.2 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) 00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] [1002:68c1] 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60] 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) 03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:4239] (rev 35) ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05) ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05) ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05) ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05) ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05) ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05) What's working: Full QE/CI Keyboard and touchpad Audio Sleep and Wake with LID Wifi - replaced Intel Card with DW1510 (rebranded) (Whitelist BIOS mod from here) - Use at your own risk SD Card reader LAN Webcam Not working: Discrete card ATI Radeon 5650m VGA - not tested Let's get started... I used the myhack method for this build, so follow instructions to build your USB installer, set BIOS settings and run the OSX Installation from here http://myhack.sojugarden.com/guide/ After creating your USB installer, run myHack again Select Install Extra and point to the Extra folder attached (extract it first) Extra.zip Boot up system with USB installer disk with -v Format the HDD per instruction from myHack site (GPT and Journaled) Select "Use my Own" when prompt, point it to the Extra folder in the root of the USB installer drive Delete the 3 files when prompt Restart the computer when finished. Remove the USB installer Boot from the HDD and complete the customization by following the wizard After logging on, in System Preferences: Enable Clicking for Trackpad Allow apps downloaded from: Anywhere for Security &Privacy Note: F11 (Pause) = Brightness, but this keyboard doesn't have ScrolLock key for Dim, so for that I use KeyRemap4MacBook to map F1 and F2 for Dim and Brightness. F5 to enable keyboard light. Insert key turns touchpad on and off.

try booting with -v dart=0 Did you build installer with MBR patch? if so, rebuild your Installer and select No for MBR. Try different USB ports, perhaps the eSata/USB combo port

Did you set Sata operations to AHCI?

Set BIOS to default and only set SATA Operations to AHCI

Try replacing SSDT with this one in Extra, rename it to SSDT.aml and remove the existing one. SSDT-i5-4300u.aml.zip The patched kernel is already in the boot pack in Extra. Boot.plist is configure to load from there.

Put back to AHCI, boot with -v, that should get you pass the error

boot without the DSDT, launch maciasl and export a clean DSDT. Attach it here and someone might be able to help you patch it.

Have you looked at this thread? I've included a bootpack to try. To get more info on how to build your USB installer and troubleshooting, start here http://myhack.sojugarden.com/guide/ Please add your system config to your signature file, include resolution, bios version, cpu...see mine as example. If you get stuck, then post error here and we'll help.