Jake Lo

Check this thread, sounds like same issue as yours.

Don't understand your question. You can't boot your OSX without your external drive?

You shouldn't need both. Remove Applesmartbatterymanager and just keep acpibatterymanager.

Try the newer version of smart battery. If it still doesn't work, try the acpibatterymanager. Battery.zip Also check preference, make sure battery status bar is checked.

Did you have HDAEnabler set to Yes in org.chameleon.boot.plist?

E6400 might have the same trackpad/trackstick as E6410. Try here. Maybe sound too.

On my signature below, select touchpad for Exx30. It links to the version best fit for that model. You just need voodoops2Controller.kext installed.

Check out the treads for E7xxx The all have Intel HD 4400 Example here

HD4400 working perfectly using chameleon switch GraphisEnabler=Yes IntelAzulFB=12.

Remove NulĆPUPowerManagement and VoodooBattery and replaced with this in Extra. Run my fix (quick) and reboot.PM.zip

Sounds like you might have a bad battery that may not hold a charge anymore. Go to the BIOS under Battery Information, see the health of the battery.

Have you tried the kext above and DSDT fix above? #181 It does work for me, but may have some artifacts here and there. HDMI works just fine.

Please list your system's specs. It's not loading your display kexts, so need to know what you have to be able to assist you.

If you have check our R,D&P, under Wifi/Boothtooth, you find that this card is not supported. Unsupported: Vendor Model Format Ven-Dev id Chip Rate SL L ML Mav Yos OOB Kext Atheros AR5B125 Half Mini PCIe 168c-0032 AR9485 B/G/N N N N N N DW1703 based on this Atheros AR5B225 Half Mini PCIe 168c-0037 AR9485 B/G/N N N N N N - Atheros AR5B22 Mini PCIe 168c-0034 AR9462 A/B/G/N ? ? N N N - D-Link DWL-G510 Rev.C PCI 1814-0302 Ralink RT61 B/G N N N N N - Dell DW1501 Half Mini PCIe 14e4-4727 BCM4313 A/B/G/N N N N N N - Dell DW1503 Half Mini PCIe 14e4-4727 BCM4313 A/B/G/N N N N N N - Dell DW1520 Half Mini PCIe 14e4-4353 BCM43224 A/B/G/N N N N N N -

HDMI does work with nvs4200, but not HD3000 for the model with Optimus.

The latest version is 1.27. Add -gux_defer_usb2 to org.chameleon.boot.plist if you have issue with sleeping after adding this kext.

No, all SMC Firmware Update are for real macs only.

Did you get QE/CI with NVS 3100? If so, you don't need AppleIntelHDGraphicsFB. It's only for the 1st Gen. GMA5700. The DSDT from my boot pack is tweaked for the Intel Display so obviously you'll have some issue. Joshhh from IM has DSDT for the Nvidia models here. See if it'll work better for you.

try this DSDT-e5440.aml.zip You don't want to use the SSDT that's not for your specific processor. See guide below to generate your own. For Clover, this here would be a good guide.

No Intel Wireless cards are supported yet, you'll just need to replace with a supported one. See my signature file below for links.

Yes, and place the kexts there.

Mounting with Clover Configurator is correct.

Yes, the most you'll get is CI. See my post here. More info here.

Have you use this guide for the build? Make sure you have ACPIBacklight installed and the patched DSDT for the model.

Try using the left port (usb 2.0). What boot pack have you tried or you just using the generic boot pack? Take a look at this guide and boot pack. Very similar to your system specs.